Enabler Electric Motor
BJ-233
Control blinds, windows, curtains or other motorized elements
Enabler Electric Motor is a device with 2 switched relay contacts that allows you to control two different functions (normally raise and lower) of motorized elements, such as blinds, curtains, screens, kitchen furniture, etc. The up & down and open & close functions of these elements can be activated using our controllers or by means of a switch.
Connect up to 16 different Enabler Electric Motor in your environment to control these two functions of 16 different motorised elements.
This device is part of our environmental control solution.
Suitable for
- Physical disabilities: spinal cord injuries, multiple sclerosis, ALS, neuromuscular disorders...
- Cerebral palsy
- Brain injuries: ictus, traumatic brain injury...
- Supply voltage: 230VAC.
- Controllable with our remotes.
- Size: 109 x 59 x 36 mm.
- Radio Frequency: 433 MHz.
- Connect up to 16 different Enabler Electric Motor on the same system.
- Two switch inputs for direct manual control.
- Three operating modes selected with a jummper: latched (auto-off at 55 seconds), dead man and combined.
- In the combined mode, the operation depends on the length of the click:
- Short click: latched (auto-off at 55 seconds).
- Long click: dead man.
- Compatible only with 230VAC single phase engines.
- Direct connection to the engine without additional wiring.
- Maximum load: 1000W (5.5 A / cos = 0.8).
- Configuration jumper.
- User's guide.
Related products
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 827220